Ergotron DM10-1007-1 Specifications download pdf (Page 10)

10 of 13

1-10

510

ENGLISH

888-61-092-G-00 rev. A • 12/13

Tablet Charging

NOTE: The power cord acts as the connect/disconnect device switching power o and on. The socket

outlet shall be installed near the equipment and shall be easily accessible.

NOTE: If module is syncing all ISIs will be green.

Power Indicator – Communicates sync and charge status with the following signals:

Individual Status Indicators (ISI) – Sequentially numbered LEDs (1 - 10) corresponding to each tablet slot in the unit:

LED - Indicators

To begin charging the tablets, plug in the power cord.

The power cord is used to turn the power on and o . Charging occurs whenever the power cord is connected

UNLESS a Macintosh® or PC notebook USB cable is connected for syncing.

Light Description

O No power to the module.

On - solid iPad devices are charging.

On - slow blink Computer is plugged into USB port and iPad devices are ready to sync or are syncing.

On - fast blink Fault Status. Please make sure all cables are seated correctly and product is operating within

speci ed operating temperature. Can also indicate a failed 30 pin or lightning cable. Contact

Ergotron Customer Support if problem continues.

Light Description

Green Fully charged.

Amber

Charging in progress.

O No device connected.

1 2 ... 5 6 7 8 9 10 11 12 13

No comments

Ergotron DM10-1007-1 Specifications Page 10